| PART |
Description |
Maker |
| IR2010PBF-15 |
Floating channel designed for bootstrap operation
|
International Rectifier
|
| IRS2001MPBF IRS2001MPBF-15 |
Floating channel designed for bootstrap operation
|
International Rectifier
|
| AUIRS2117S AUIRS2117S-15 |
Floating channel designed for bootstrap operation
|
International Rectifier
|
| AUIRS2110STR AUIRS2113S AUIRS2113STR AUIRS2110-15 |
Automotive Grade
Floating channel designed for bootstrap operation
|
International Rectifier
|
| AUIRS2128STR AUIRS2127STR AUIRS21281S AUIRS21271S |
Automotive Grade
Floating channel designed for bootstrap operation
Automotive Grade
|
International Rectifier
|
| MAX3082 MAX3084 MAX3086 MAX3089 MAX3080-MAX3089 MA |
Fail-Safe, High-Speed 10Mbps, Slew-Rate-Limited RS-485/RS-422 Transceivers
Fail-Safe.High-Speed (10Mbps).Slew-Rate-Limited RS-485/RS-422 Transceivers 失效保护、高10Mbps)、限摆率、RS-485/RS-422收发
Floating-Point Digital Signal Processor 352-FC/CSP LINE TRANSCEIVER, PDSO8
Fixed-Point Digital Signal Processor 697-FCBGA
Replaced by TMS320C6722B : Floating-Point Digital Signal Processor 144-HTQFP
Replaced by TMS320C6713B : Floating-Point Digital Signal Processor 272-BGA
Floating-Point Digital Signal Processors 272-BGA
Replaced by TMS320C6711D : Floating-Point Digital Signal Processor 256-BGA
|
Maxim Integrated Produc...
Maxim Integrated Products, Inc.
|
| REC-14LH REC-16LH |
Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element, Unsealed, Designed for High Pressure Chamber of Cylinders, High Accuracy, Very Good Repeatability
|
Vishay
|
| T6340A T6505A T6505A-ADG T6505A-AEG T6505A-BDG T65 |
T6340A provides the low-dropout bias supply and the high performance alternative solution for the white LEDs application.
T6505A is designed for LED displays.
The T6506A is a 3-channel constant current LED drivers.
16-channel Constant Current LED Driver with LVDS Interface
24-channel LED Driver with LVDS Interface
16-channel LED Driver with LVDS Interface
24-channel Constant Current LED Driver with LVDS Interface
The T8601 is a low cost, simple, high-efficiency off-line LED driver IC.
The T8611 is a simple, high voltage, linear current regulator.
The T6331A are integrated, high-efficiency white or RGB LED drivers.
The T6322A is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage.
The T6333A is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage.
|
Taiwan Memory Technology
THine Electronics, Inc.
|
| TC4403CPA TC4403MJA TC4403 TC4403EPA |
1.5A High-Speed, Floating Load Driver
The TC4403 is a modified version of the TC4425 driver, intended to drive floating or isolated loads requiring high-current pulses. The load is intended to be connected between the outputs without other reference to supply or ground. Then,
The TC4403 is a modified version of the TC4425 driver, intended to drive floating or isolated loads requiring high-current pulses. ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
| TC1029EUA TC1029 TC1029EOA TC1029EPA |
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from ...
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from a single supply, however, operation from dual supplies is also possible, and the power supply current drai
Linear Building Block - Dual Low Power Op Amp
|
MICROCHIP[Microchip Technology]
|
| MCP100T-270I_TT MCP100T-300I_TT MCP100T-315I_TT MC |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
CPU / System Supervisors
Microcontroller Supervisory Circuit with Push-Pull Output
|
MICROCHIP[Microchip Technology]
Microchip Technology Inc.
Microchip Technology, Inc.
|
